With the release of AMD’s Threadripper CPUs into the HEDT market, board partners have released new motherboards based on the X399 chipset. Consumers are going to see quad channel memory, native 4-Way SLI and Crossfire capabilities, more full-speed M.2 slots, added 10G network ports, and more on the new platform. We're taking a quick look at each of the motherboards that the vendors are promoting in the market, as well as a few upcoming teasers.

Related Reading

AMD Ryzen Threadripper Needs a Mother(board)

A big takeaway from our AMD Ryzen Threadripper 1950X and 1950X review is the increase in CPU connected PCIe 3.0 lanes. A full 60 lanes are available to the PCIe slots and M.2 drives, while 4 lanes head off to the chipset where it's muxed for USB, SATA, low-level I/O, and other features. The increase in CPU PCIe lanes is set up to allow for a lot more flexibility connecting devices using PCIe bandwidth. 

The four major players, ASRock, ASUS, GIGABYTE, and MSI, have launched X399 motherboards for Threadripper. These boards equip the massive 4094-pin socket with eight DIMM slots to cover the four memory channels and then differentiate themselves in PCIe configuration, IO, styling and software support. 

Unlike Ryzen, the base processor is not a true SoC as the term has evolved over the years. In order to get the compliment of SATA and USB ports, each Threadripper CPU needs to be paired with an X399 chipset. So aside from the CPU PCIe lanes, the 'new' X399 chipset also gets some IO to play with:

Unlike mainstream platforms that have several chipsets to choose from that vary in capability and cost, the AMD high-end platform only has a single chipset, similar to Intel's X299. As we've learned over the last few months, some elements of the motherboard base cost, such as the socket, can cost a pretty penny to the board manufacturers, which in turn will be forwarded on to the user. These motherboards appear to start somewhere around $249-$299, with the top board so far set at $549. Guess which one AMD sent us for our CPU review.

The Underlying Block Diagram

When PCIe is the game, it becomes time to play with controllers and ports to see what fits. It all starts with the underlying diagram for Threadripper and X399:

AMD's marketing on the left is set out to explain that each product in the Threadripper and X399 line will be 'fully enabled' - none of the chips will be limited in PCIe lane counts or DRAM for the sake of segmentation. AMD is happy at this point to keep segmentation limited to cores, frequency, and L3 cache.

The diagram shows the two hubs for everything to connect to: the CPU and the chipset. The CPU has 60 PCIe lanes, provided in 3 or 4 PCIe root complexes at x16 each (the diagram above suggests x16/x8/x16/x8). These will often go towards the main PCIe slots to support add-in cards like GPUs, or they could be partitioned off for RAID controllers or fast ethernet if required. In total, AMD has stated that the platform can support six GPUs maximum. The CPU also supports eight USB 3.1 (5 Gbps) Type-A ports, quad channel DDR4, and support for up to three PCIe 3.0 x4 storage drives for 3-way NVMe.

Threadripper CPUs reserve four PCIe lanes for the chipset, which similar to Intel acts like a PCIe switch for more IO - although AMD only offers a few lanes here compared to Intel's 24 PCIe 3.0 x4 lanes. 

From the chipset there are eight PCIe lanes, which AMD here has suggested reserving two for gigabit Ethernet, four for a PCIe x4 slot, one for a PCIe x1 slot, and one for a WiFi module. Alongside the PCIe lanes are eight SATA ports, six USB 2.0 ports, four USB 3.1 (5 Gbps) Type-A ports, one USB 3.1 (5 Gbps) Type-C port and two USB 3.1 (10 Gbps) ports with appropriate redrivers. In a change to what we normally see on Intel motherboards, AMD lists SPI and Audio features as coming from the CPU rather than the chipset.

AMD Suggests Variants

As part of the launch, AMD is wanting to promote the different ways in which an X399 motherboard could be arranged depending on the workload requirements.

X399 Potential Configurations
  Use PCIe Lanes Total
Content Creator 2 x Pro GPUs
2 x M.2 Cache Drives
10G Ethernet
1 x U.2 Storage
1 x M.2 OS/Apps
6 x SATA Local Backup
x16/x16 from CPU
x4 + x4 from CPU
x4 from CPU
x4 from CPU
x4 from CPU
From Chipset
52 Lanes
Extreme PC 2 x Gaming GPUs
1 x HDMI Capture Card
2 x M.2 for Games/Stream
10G Ethernet
1 x M.2 OS/Apps
6 x SATA Local Backup
x16/x16 from CPU
x8 from CPU
x4 + x4 from CPU
x4 from CPU
x4 from CPU
From Chipset
56 Lanes
Streamer 1 x Gaming GPU
1 x HDMI Capture Card
2 x M.2 Stream/Transcode
10G Ethernet
1 x U.2 Storage
1 x M.2 OS/Apps
6 x SATA Local Backup
x16 from CPU
x4 from CPU
x4 + x4 from CPU
x4 from CPU
x4 from CPU
x4 from CPU
From Chipset
40 Lanes
Render Farm 4 x Vega FE Pro GPUs
2 x M.2 Cache Drives
1 x M.2 OS/Apps
6 x SATA Local Backup
x16/x8/x8/x8
x4 + x4 from CPU
x4 from CPU
From Chipset
52 Lanes

Each of these potential configurations would run into several thousand dollars a piece for a full build - the M.2 drives were suggested at 512GB minimum, with the SATA drives in RAID configurations as well. AMD is making no joke; they want to be the premium platform.

New Controllers for X399

With each of these motherboard overviews, we like to cover a few of the newer controllers to hit the market that motherboard manufacturers might take advantage of. Given the recent X299 launch on the Intel side, not much has changed since. The big parts to enter the consumer space are Aquantia's multi-gigabit ethernet controllers.

Aquantia launched two ethernet controllers: the AQC107 which supports 100MB, 1G, 2.5G, 5G and 10G, and the AQC108 which supports 100MB, 1G, 2.5G and 5G, all through standard RJ45 connectors. Motherboard manufacturers can use these controllers directly on the boards, or bundle them in add-in cards like the AQN107 and AQN108 above. We've seen cards from ASUS and GIGABYTE already hit the market based on these controllers, while ASRock and MSI prefer to integrate them direct.

The second controller worth mentioning is the updated ASMedia ASM3142 controller, providing USB 3.1 Gen 2 (10 Gbps) functionality to motherboards that need more USB 3.1g2. Originally we saw the ASM1142 single lane controller, while the ASM2142 integrated a dual lane design such that all the ports had peak bandwidth when multiple ports are in use. ASM3142 is a low powered version of the ASM2142, but still supporting all the ports at peak bandwidth.

Third is the updated Realtek ALC1150 audio codec, known as the ALC1220. The ALC1220 improves peak SNR while adding new functionality. ASUS run a customized version known as the ALC1220A, which removes some of the excess function for a stripped down version unique to them but configured in a partnership with Realtek.

The Motherboards

The seven motherboards we have to discuss are:

  • The ASRock X399 Taichi
  • The ASRock X399 Professional Gaming
  • The ASUS X399 ROG Zenith Extreme
  • The ASUS Prime X399-A
  • The ASUS Strix X399-E Gaming
  • The GIGABYTE X399-Gaming 7
  • The MSI X399 Gaming Pro Carbon
  • The MSI X399 SLI Plus

Added on 9/19: The GIGABYTE X399 Designare EX

Added on 10/10: The MSI X399 SLI Plus

ASRock X399 Gaming Professional
Comments Locked

99 Comments

View All Comments

  • BoemlauweBas - Friday, October 20, 2017 - link

    The fact you still can't buy them is one thing, and it will be expensive. Then again, if money ain't a thing & you'll agree one kidney should be enough for anyway. Buy this for your (Yes, it's in the sales sheet) for you games / media. For the real OG's would go for something like Sandisk's Infiniflash.....
    I know right .... https://www.youtube.com/watch?v=iWvrOItRSyQ
  • plonk420 - Tuesday, September 19, 2017 - link

    you go fairly high end motherboard, but then you get terrible SATA cards? ಠ_ಠ

    yeah, do like Supermicro (there's a couple cards low $100s) or at least that Adaptec.

    just like IDE cards back in the day... buy a crap card, get crap performance.
  • mapesdhs - Tuesday, September 19, 2017 - link

    It's a shame Intel's never made a PCIe card using its own controller, because of course Intel's SATA3 ports on its own boards always work nicely. But then, if they did, loads of people would buy the card to fit to older boards (especially X58, Z68, X79, etc.) instead of upgrading to a newer board, and it'd be cool to have such an option for AMD boards aswell. Never gonna happen though I guess.
  • Oksana - Saturday, September 19, 2020 - link

    I really like Thunderbolt, but also want to build a Threadripper computer. Is it possible to have the best of both worlds and add a thunderbolt card?
  • ddriver - Friday, September 15, 2017 - link

    It has six. How much do you need? Considering it also has 3 M2 slots.

    That 10 gbit lan card is for connecting to a proper nas server. You don't cram a workstation with a dozen HDDs.
  • nathanddrews - Friday, September 15, 2017 - link

    I'm not building a workstation.
  • ddriver - Friday, September 15, 2017 - link

    So you are building a file server then? Senseless choice of hardware then ;)
  • HomeworldFound - Friday, September 15, 2017 - link

    A file server is a good wife excuse to build with a Threadripper. He can pretend he needs one core per hard drive and in order to stream video to more than one TV he needs two GPUs. It works.
  • ddriver - Friday, September 15, 2017 - link

    So a dumb wife having to approve your purchases is a realistic scenario? :D
  • HomeworldFound - Friday, September 15, 2017 - link

    In my location telling people that you can build a computer makes people want to touch you.

Log in

Don't have an account? Sign up now