The new Opteron 6300: Finally Tested!by Johan De Gelas on February 20, 2013 12:03 AM EST
AMD unveiled their Opteron 6300 series server processors, code name Abu Dhabi, back in November 2012. At that time, no review samples were available. The numbers that AMD presented were somewhat confusing, as the best numbers were produced running the hard to assess SPECJbb2005 benchmark; the SPEC CPU2006 benchmarks were rather underwhelming.
Compared to an Opteron 6278 at 2.4GHz, the Opteron 6380 (2.5GHz) performed 24% better, performance per Watt improved by 40% according to AMD. In contrast, SPECint_Rate2006 improved by only 8%, and SPECfp_Rate2006 by 7%. However, it is important to note that SPECCPU2006 rates do not scale well with clockspeed. For example an 8% clockspeed (6380 vs 6376) only results in a 3.5% higher SPECint_Rate2006 and a 3% higher SPECfp_Rate2006. And the SPEC CPU 2006 benchmarks were showing the Interlagos Opteron at its best anyway. You can read our analysis here.
Both benchmarks have only a distant link to real server workloads, and we could conclude only two things. Firstly, performance per GHz has improved and power consumption has gone down. Secondly, we are only sure that this is the case with well optimized, even completely recompiled code. The compiler setting of SPEC CPU 2006, the JVM settings of Specjbb: it is all code that does not exist on servers which are running real applications.
So is the new Opteron "Abu Dhabi" a few percent faster or is it tangibly faster when running real world code? And are the power consumption gains marginal at best or measureable? Well, most of our benchmarks are real world, so we will find out over the next several pages as we offer our full review of the Opteron 6300.
Post Your CommentPlease log in or sign up to comment.
View All Comments
Sivar - Wednesday, February 20, 2013 - linkPlease go away. You don't add any new information to the discussion.
Your writing is of a teenager who knows nothing of processor architecture, the brilliant engineers at both AMD and Intel, or the competitive landscape.
You present no data, only misinformed opinion. You reduce the quality of this discussion, and have shown no interest in improving your knowledge.
JamesAnthony - Wednesday, February 20, 2013 - linkIn the article it mentions you were using the E5-2660 CPU (8 core 2.2 GHz) 95W, in a Dell PowerEdge R720 server
It may have been a lot more useful to also have included the E5-2680 (8 core 2.7 GHz) and the E5-2690 (8 Core 2.9 GHz) as while they are 130W parts, they are ones that are often used in the PowerEdge R720 and from what we find in a lot of server sales the higher performance ones are very popular for transactional database servers and payment processing servers.
If you want to go head to head on Intel's top part vs AMD's top part, then it would seem it should be the E5-2690 vs 6386 SE
JohanAnandtech - Wednesday, February 20, 2013 - linkWe all know that when you want top performance, Intel is the way to go. So I don't really see the point, even AMD will tell you that the 6376 and 6380 are their most competitive parts.. It is pretty obvious that the E5-2690 2.9 GHz will be faster and consume less than a 6386SE. I don't think our readers really need to see numbers on that.
And I really doubt that the E5-2690 are sold that much. Most reports say that the top bins with the highest TDP are less than 5% of the total sales.
lwatcdr - Wednesday, February 20, 2013 - linkWow this is about the most gibberish I have seen in a post ever.
Good heavens you are an idiot.
Let's just tear this post bits so this person will NEVER post on here again.
1"No, it's worth per dollar that you have paid to buy Intel based servers. Intel is more reliable because it has Hyperthreading so you can reduce the latencies that will occur in every workloads."
Hyperthreading has nothing to do with reliability. So that was a waste of bandwidth.
"Unlike AMD's engineers who can not design a microprocessor properly. It was AMD's own fault why AMD did not have money like Intel"
My I introduce you to Titan http://www.olcf.ornl.gov/titan/ The worlds most powerful computer and powered by AMD cpus. AKA yea I think that AMD can actually do pretty well at designing CPUs so this part of your post is also pure manure.
"Look 99% Bank's in the world uses Intel based ATM as Intel processor can send information without any error." And here we can see that you understand nothing about digital theory or communications. Again a waste of bandwidth.
"That is why IBM itself does not use Power based processors for its ATM machine because its CEO has admitted that its engineers are not capable to design a lower power processor. So, IBM uses Intel as the standard processor to exchange information between ATM machine to server, so every digits that sent will come in exact same digits when it has been received."
The IBM power line is for high end systems not for ATM machines. Odds are good that many banks use Power based system for handling ATM transactions. IBM uses Intel or AMD because it is cheap and you can get standard boards. As to the every digit sent nonsense. IT IS DIGITAL you MORON. The communications links have error checking and correction not the CPUs. Please NEVER WASTE OUR TIME AGAIN, YOU KNOW NOTHING OF VALUE ON THIS SUBJECT.
toyotabedzrock - Wednesday, February 20, 2013 - linkSomething is wrong with the LZMA benchmarks.
Can you do a realworld test? There are scripts out there to do this.
LZMA is built around the idea that decompression is supposed to be much faster than compression.
JohanAnandtech - Wednesday, February 20, 2013 - linkFrom the 7zip manual:
"The benchmark shows a rating in MIPS (million instructions per second). The rating value is calculated from the measured speed, and it is normalized with results of Intel Core 2 CPU with multi-threading option switched off. "
So that is the reason why the compression MIPS values are in the same order as the decompression. The decompression "MB/s" values are indeed about 10x and more higher than compression.
Oldboy1948 - Thursday, February 21, 2013 - linkIt is an interesting bench and if cache and memory are fast decompress and compress will be very close. It looks better for Bulldozer in this:
ARM has a long way to go if it will be a server one day.
extide - Wednesday, February 20, 2013 - linkCan we PLEASE get folding@home benches?! musky on the hardocp forums has come up with a system where you can run repeatable benchmarks. Myself as well as many others would really love to see F@H benches on systems like this!
JohanAnandtech - Wednesday, February 20, 2013 - linkOk, Link? :-)
alpha754293 - Wednesday, February 20, 2013 - linkBecause of the way that the current Opteron architecture is (1 FPU per module), did you run with the number of LS-DYNA processes equal to the number of FPUs on chip or did you run it based on per "core" (i.e. 2 processes per module)?