X99 and Haswell-E, due to the price, the performance and the feature set, ends up being very expensive compared to the mainstream. It is an odd state of affairs in the self-build arena when a reviewer states that the budget end of a spectrum is sub-$300. In this space we find the ASUS X99-A at $275 MSRP. This motherboard is the topic of our review today.

When considering the motherboard market as a whole, in all except in the server market, the $300 level usually represents the premium level marker. There are very few motherboards on the Z97 chipset that pass this barrier for example, and those that do are usually the cream of the crop. As a result, with Z97 the $250-$300+ range really aims for the higher mainstream performance and functionality. In X99, the $250-$300 level is the base. One of the reasons for this is that due to the prosumer nature of the market, where every motherboard has a lot of features which do not come cheap. There's very little demand for a stripped system outside of the OEM market.

So as a result, the budget end of the market for X99 is still feature packed, even with the X99-A. For comparison we reviewed the $400 ASUS X99-Deluxe when the chipset first launched, and it came with almost everything apart from the kitchen sink. The Deluxe was ASUS' main product for the X99 launch focus, and the X99-A arrived a few weeks later. At $275 it represents a cut down version of the Deluxe.

ASUS X99-A Overview

One new feature that crosses over from the Deluxe is the EZ XMP switch on the board, allowing users to apply their high speed memory profile without even touching the BIOS. My last trip to a LAN event resulted in anecdotal findings of high speed memory kits being used at JEDEC speeds, so something as simple as this should help let users get the most out of their memory.

For gaming or PCIe coprocessor use, this board is aimed at tri-GPU setups with a full PCIe 3.0 x16/x16/x8 layout. One potential benefit of this rather over focusing on full-bandwidth four-way arrangements is that the three-way version saves some build cost by avoiding the additional timing circuits needed for full bandwidth when using four cards. There is an additional PCIe 2.0 x4 slot from the PCH in the middle of the main PCIe slots for Thunderbolt or additional cards. This is situated as to not interfere with dual slot PCIe configurations.

As with most X99 boards there is full access to the 10 SATA ports from the PCH - six of which are RAID capable and the other four which are not as they are from the secondary AHCI controller. For good measure there is also a SATA Express port and a M.2 x4 Gen 3.0 port, with the SATA Express getting RST privileges. The SATA Express shares bandwidth with the PCIe 2.0 x4 slot whereas the M.2 is switched with the final PCIe slot. There are 10 USB 3.0 ports total which come as five from the PCH (two headers and a rear IO port), three from an ASMedia hub (rear panel) and two from an ASMedia controller (also rear panel). An interesting deviation in design is that the ASMedia ASM1074 hub used on the board is a 1-to-4 hub but only three ports are used. This is most likely due to the rear panel design, where a set of three USB ports doesn't really exist.

In terms of performance the system does not implement Multicore Turbo, meaning that stock performance is down compared to some other products but a simple click on the TPU switch avoids this with a small 3.9 GHz overclock. ASUS' strengths on X99 remain the audio performance, with the POST times and power consumption being ballpark for the chipset. ASUS also bundles in their BIOS and software combination which both hit the higher notes in terms of the competitors.

At the time I started writing this review the ASUS X99-A was only $240 at Newegg, making it a really nice price, however it has since gone back up to $275. The other X99 motherboard from this price range we have reviewed scored quite highly and the X99-A gives it a run for its money for sure.

Visual Inspection

Part of the initial appeal of the X99-Deluxe was the style in which it was presented – the white and silver livery gave it a streamlined look, and the protective cover over the rear IO and audio section of the motherboard added to that effect. The X99-A retains some of this styling, although it is limited in effect due to it only being on the three heatsinks. These heatsinks are also not joined to each other, which might reduce the effect of the aesthetic.

Nevertheless the motherboard itself feels a little busy, with lots of components having the white border around them for the SMT machines for placement. The socket area is fairly busy in that regard, and the CPU has access to five of the fan headers – two 4-pin CPU headers in the top right, two chassis headers to the bottom left of the DRAM slots near the rear panel, and another just below the 24-pin ATX header. The final fan header is below the SATA ports, with a FAN_EXT header for fan extension cards on the bottom of the board near the rear audio port. Each of these fans is 4-pin and can support PWM and DC fans.

Alongside the DRAM on the right hand side is the MemOK button, useful for recovering from failed POST due to memory issues. Beneath this is the 24-pin power connector and a fan header, followed by two of the SATA ports. These are RAID/RST compatible, along with the next four in grey, but the following four in black are not as they are from the secondary AHCI controller on the chipset. The middle two grey SATA ports are part of the SATA Express connector, and between all of these is one of the USB 3.0 headers.

In the chipset area of the board, below the heatsink is the M.2 x4 Gen 3.0 slot, supporting 2242 to 22110 sized drives. Underneath is our EZ XMP switch, EPU and two-stage TPU.

Along the bottom of the board, from right to left, is the front panel header, two USB 2.0 headers, a USB 3.0 header, a TPM header, the two-digit debug LED, power and reset buttons, a COM header, the fan extension header and the front panel audio.

The Crystal Sound 2 audio solution is an upgraded ALC1150 configuration featuring PCB separation, an EMI shield and filter caps for the front panel audio. Also in this area the PCIe arrangement gives a PCIe 3.0 x16, 2.0 x1, 2.0 x4, 3.0 x16, 2.0 x1 and a 3.0 x8. This gives x16/x16/x8 for GPUs when a 40-lane PCIe CPU is used, or x16/x8/x4 when a 28-lane CPU is used. Unfortunately that means that the i7-5820K will not be able to use three-way SLI. Also worth noting is that when the M.2 slot is in use, the final PCIe slot is disabled due to bandwidth switching.

The rear panel gives the USB BIOS Flashback button, a combination PS/2 port, four USB 2.0 ports, an Intel I218-V network port, six USB 3.0 ports and the audio jacks. The six USB ports are split such that those under the network port are from the controller, the next two to the right are from the hub, and the final two are split between one from the PCH and one from the hub.

Gallery: ASUS X99-A

Board Features

ASUS X99-A
Price US (Newegg)
Size ATX (305 x 244 mm)
CPU Interface LGA2011-3
Chipset Intel X99
Memory Slots Eight DDR4 DIMM slots supporting up to 64 GB
Up to Quad Channel, 2133-3200 MHz
Video Outputs None
Network Connectivity Intel I218-V
Onboard Audio Realtek ALC1150 via Crystal Sound 2
Expansion Slots 2 x PCIe 3.0 x16
1 x PCIe 3.0 x8
1 x PCIe 2.0 x4 (default x1)
2 x PCIe 2.0 x1
Onboard Storage 6 x SATA 6 Gbps, RAID 0/1/5/10
4 x S_SATA 6 Gbps, no RAID
1 x SATA Express
1 x M.2 x4 Gen 3 for 2242 to 22110
USB 3.0 2 x Headers for 4 Ports (PCH)
1 x Rear Panel Port (PCH)
2 x Rear Panel Ports (ASMedia controller)
3 x Rear Panel Ports (ASMedia hub)
Onboard 10 x SATA 6 Gbps Ports
1 x SATA Express
1 x M.2 x4 Gen 3
6 x Fan Headers
2 x USB 3.0 Headers (PCH)
2 x USB 2.0 Headers
Thunderbolt Header
COM Header
TPM Header
EZ XMP Switch
DirectKey Header
MemOK Button
Thermal Sensor Header
TPU/EPU Switches
Power/Reset Puttons
Overvolt Header
EXT_Fan Header
SLI/CFX Switch
Front Panel Header
Front Audio Header
Power Connectors 1 x 24-pin ATX
1 x 8-pin CPU
Fan Headers 1 x CPU (4-pin)
1 x CPU_OPT (4-pin)
4 x CHA (4-pin)
IO Panel USB BIOS Flashback Button
Combination PS/2 Port
Four USB 2.0 Ports
Five USB 3.0 Ports via ASMedia
One USB 3.0 Port via PCH
Intel I218-V Network Port
Audio Jacks via Realtek ALC1150
Warranty Period 3 Years
Product Page Link
ASUS X99-A BIOS
Comments Locked

37 Comments

View All Comments

  • Samus - Tuesday, December 23, 2014 - link

    Probably an awesome board for $200, but I agree with the conclusion: just not worth it for $250+ when $300-$350 gets you a way nicer board. We're already talking supercar-class with the X99 platform as it is so why penny pinch when building a $1000+ PC. If you're building a Ferrari, build a Ferrari.
  • ziphnor - Tuesday, December 23, 2014 - link

    Just did a built with an X99-A myself. With the prices available to me the X99 Deluxe is ~60% more expensive than the X99-A and seems to only offer a lot of crap that i dont need in comparison? How does it make my desktop PC more "Ferrari" by having WiFi, extra ethernet ports or more storage options, especially when i have no need of them?
  • SuperVeloce - Tuesday, December 23, 2014 - link

    I agree. This is a spot on board for something like 5820k and single gpu setup.
  • dcoca - Tuesday, December 23, 2014 - link

    I disagree, it supports X16 X16 for sli and plus X8 for tri and solution: I have this board and with the Asus app it overclocked my cpu to 4.6 all cores stable.. and it had x4 for m.2 so that's great in the future... I picked it overs cause of the Asus name and features that I needed..
  • dcoca - Tuesday, December 23, 2014 - link

    That should of read AMD solution...
  • ziphnor - Friday, December 26, 2014 - link

    Out of curiosity, could you provide some details on that 4.6 OC? Is it "stable" or Prime95 stable, and what voltage did you need? I am on air, and have only managed 4.3@1.175V with my 5820k, and only in combination with setting a Turbo Boost TDP limit (otherwise i cannot run Prime95 succesfully)
  • dcoca - Friday, January 9, 2015 - link

    Sup sir, well the application did it's thing and increase the vcore to 1.3 and I ran prime95.. with that said I took it back to 4.4 cause the antech 650 wasn't cooling it to the level I want... I run simulations for a hobby of the universe so can't have the pc crash on me cause of heat
  • R3MF - Tuesday, December 23, 2014 - link

    agreed, what i did with the MSI X99 SLI-plus
  • paesan - Wednesday, December 24, 2014 - link

    I did a build with this board for my brother and was able to overclock the 5820K to 4700 using the 5 way optimization. I used the Corsair H100i for cooling the cpu. This board is the best price point for those that do not need wifi, extra lan port and other extra features that are in the deluxe version. I agree with you that the deluxe version adds more features that a lot of people have no need for. I have a z87-pro board and never use the wifi.
  • R3fug388 - Tuesday, December 23, 2014 - link

    The bottom of the first page, where you mention the 4 USB 2.0 on the back panel. Is that a typo? Is it supposed to be USB 3.0?

Log in

Don't have an account? Sign up now