Toshiba was the first maker of hard drives to announce a PMR-based 14 TB HDD last December and apparently it is the first company to start their commercial shipments. As of this week, Supermicro has qualified Toshiba’s MG07-series HDDs with 12 TB and 14 TB capacities for use on select storage server platforms and is now offering the appropriate systems to customers. In addition to servers, the drives will be available from Supermicro’s online store eventually.

Toshiba’a MG07 enterprise-grade helium-filled HDDs featuring 14 TB and 12 TB capacities rely on nine and eight PMR platters respectively from Showa Denko, with ~1.56 TB capacity per platter. The drives feature a 7200 RPM spindle speed, a 256 MB cache buffer, and a SATA 6 Gbps interface, which is in line with other HDDs for nearline storage applications. Power consumption of Toshiba’s 14 TB hard drive does not exceed 7.6 W, so it is drop-in compatible with virtually all backplanes and servers, but makers of such equipment still need to qualify the drives with their products to ensure their fine operation. Just like other enterprise-grade HDDs, Toshiba’s 12 TB and 14 TB offerings feature enhancements to improve their durability and reliability, including top and bottom attached motors, RVFF, environmental sensor, and so on.

Supermicro has qualified Toshiba’s MG07-series drives with a number of its SuperStorage (SSG) systems, including its top-of-the-range SSG-6049P-E1CR45H/SSG-6049P-E1CR45L 4U machines based on two Intel Xeon Scalable processors with up to 56 cores in total and supporting up to 45 hot-swap 3.5-inch HDDs and up to six NVMe SSDs (connected to PCIe lanes). When fully populated with Toshiba’s 14 TB hard drives, such servers can store 630 TB of data on HDDs and terabytes more on flash drives. Customers interested in maximum HDD storage density can now order SuperStorage machines equipped with Toshiba’s 14 TB HDDs from Supermicro.

Brief Specifications of Toshiba's MG07ACA HDDs
Capacity 14 TB 12 TB
P/N 4K Native MG07ACA14TA MG07ACA12TA
512e MG07ACA14TE MG07ACA12TE
Platters 9 8
Heads 18 16
Recording Technology Perpendicular Magnetic Recording (PMR) / Conventional
RPM 7200 RPM
Interface SATA 6 Gbps
DRAM Cache 256 MB
Persistent Write Cache Yes
Helium-Filling Yes
Sequential Data Transfer Rate (host to/from drive) 260 MB/s ~250 MB/s
MTBF 2.5 million
Rated Annual Workload 550 TB
Acoustics (Seek) unknown
Power Consumption Random read/write 7.6 W ? W
Idle 4.6 W ? W
Warranty 5 Years

Toshiba’s MG07-series hard drives are rated for 550 TB average annualized workloads, 2.5 million hours MTBF, and are covered with a five-year warranty. With this level of reliability, it is not surprising that the drives are rather expensive. German retailer charges €619 w/VAT ($725) for a 14 TB version and at press time was the only company in the world to offer this HDD (this does not mean it has the drives in stock). Meanwhile, per-drive prices from Supermicro will depend on volumes and other factors.

Related Reading

Source: Toshiba

Comments Locked


View All Comments

  • Arbie - Sunday, July 15, 2018 - link

    I think I'm with you, Takeshi7. Like the others, I mostly want to know if a drive is shingled, so I can avoid it. If the correct term for "non-shingled" is CMR then that should be used. If PMR is ambiguous then it should be avoided. I certainly don't want to buy a drive described (correctly) as PMR only to find that it's shingled. The fact that we've muddled things up to now doesn't mean we should continue to do so. Especially on a tech website.
  • nismotigerwvu - Friday, July 13, 2018 - link

    I think it's mentioned to emphasize that this is a conventional drive, albeit He filled, rather than some exotic technology (HAMR, SMR, MAMR...ect).
  • nandnandnand - Friday, July 13, 2018 - link

    Do you make this complaint on every HDD article AnandTech runs? Because I'm getting deja vu. BTW, STFU.
  • takeshi7 - Friday, July 13, 2018 - link

    Yes. Yes I do. And I'll continue making the complaint until AnandTech stops being wrong.
  • returnzer0 - Friday, July 13, 2018 - link

    They're not wrong. By your own statements, you just think it's unnecessary.
  • LordSojar - Friday, July 13, 2018 - link

    This drive doesn't have a spindle. It's new Spindleless Technology, brought to you by IMPOSSIBRU Tech. I hear it works well, just like warp drive.
  • CheapSushi - Friday, July 13, 2018 - link

    I hope SSHDs make a come back when QLC NAND comes out. The largest SSHD is just 2TB I believe. A 14TB SSHD with say 1GB of QLC NAND I think would work well as a combination. I'm not saying this because TLC AND QLC NAND SSDs wouldn't be able to meet someones need for bulk storage. But one common dismissal of SSHDs was always that the NAND part was very tiny. If we're going to make 3.5" HDDs, I can see QLC taking a more active role in them to really make them shine further.
  • PeachNCream - Friday, July 13, 2018 - link

    Probably a bad idea given the low number of P/E cycles of current QLC and the high number of write operations a disk cache is likely to absorb.
  • Lolimaster - Friday, July 13, 2018 - link

    Dunno why it's so difficult to include more dram cache, at least 512MB/1GB for drives 4TB and up.
  • adr0106 - Sunday, July 15, 2018 - link

    There is simply no benefit. Cache is created to optimize data transfer from the system to media. The size increase of modern HDDs is reached by adding multiple platters. Still reading / writing operations are done to one platter / one side of it at a time. This is why sequential transfer rate is not changing with the size increases within one HDD generation.
    Caches are adjusted only when platter density allows faster speed. Otherwise you will just put lots of data into a cache that will be waiting for being written to media and take a risk that it disappears due to power loss.

Log in

Don't have an account? Sign up now