ASUS P8Z68-V PRO: Board Features

ASUS P8Z68-V PRO
Market Segment Performance
CPU Interface LGA 1155
CPU Support i3/i5/i7 Sandy Bridge
Chipset Z68
Base Clock Frequency 80.0 MHz to 300.0 MHz in 0.1 MHz intervals
DDR3 Memory Speed 1333 MHz by default, 800-2400 MHz supported
Core Voltage Auto, offset or fixed modes, 0.800 V to 1.990 V in 0.005 V intervals
CPU Clock Multiplier Dependent on CPU
DRAM Voltage Auto, 1.2 V to 2.2 V in 0.000625V intervals
DRAM Command Rate Auto, 1T-3T
Memory Slots Four 240-pin DDR3 DIMM slots in dual-channel
Regular unbuffered DDR3 memory
Up to 32GB total supported
Expansion Slots 3 x PCI Express 2.0 x16 slots (x16/x0 or x8/x8, final x1 or x4)
2 x PCI Express 2.0 x1 slot
2 x PCI slots
Supports ATI Crossfire
Supports NVIDIA SLI
Onboard SATA/RAID 2 x SATA 6.0 Gbps ports (white) supporting RAID 0/1/5/10
4 x SATA 3.0 Gbps ports (light blue) supporting RAID 0/1/5/10
2 x SATA 6.0 Gbps ports (dark blue) from Marvell
1 x eSATA 3.0 Gbps ports from JMicron JMB362
Onboard 4 x SATA 3Gbps connectors
4 x SATA 6Gbps connectors
6 x Fan Headers (2x4-pin, 4x3-pin)
3 x USB 2.0 headers support additional 6 USB 2.0 Ports
1 x USB 3.0 header supports additional 2 USB 3.0 Ports
1 x Power on button
1 x Reset button
1 x Front panel audio header
1 x S/PDIF out connector
2 x Firewire/IEEE 1394 headers
TPU/EPU/MemOK buttons
Onboard LAN Intel® 82579 Gigabit Fast Ethernet
Onboard Audio Realtek® ALC892 8-Channel HD Audio
Power Connectors 24-pin EATX Power connector
8-pin EATX 12V Power connector
Fan Headers 2 x CPU Fan (4-pin, 3-pin)
2 x CHA Fan (4-pin, 3-pin)
2 x PWR Fan (3-pin)
IO Panel 1 x RJ45 LAN connectors
1 x Audio port (Line-in, Line-out, Mic-in)
6 x USB 2.0 ports
2 x USB 3.0 ports
1 x Optical S/PDIF Out connector
1 x IEEE 1394 port
1 x eSATA 3Gbps ports
HDMI video output
DVI video output
VGA video output
BIOS Version 8801
Warranty Period 3 Years

ASUS P8Z68-V PRO: In The Box

  • IO Shield
  • SLI bridge
  • 4 x Locking SATA cables with one right-angled end
  • USB 3.0 back panel

Compared to some of the P67 extras we've seen, ASUS are middle of the road with this offering.

ASUS P8Z68-V PRO: Software

AI Suite II

ASUS kindly wrap all their software into one package called the AI Suite II. You may remember this from our P8P67 PRO review. Not a lot has changed to be honest—the major one is that you can now overclock the integrated GPU from the software. I'll give a quick rundown:

 

AI Suite II is a program that lets you adjust:

  • The overclock of the system, in terms of BCLK, multiplier, voltages, iGPU speed
  • The switching frequencies for the DIGI VRM
  • The power saving utilities on offer
  • The full fan speed profile for the chassis and CPU fans, with double ramping
  • Thresholds for fans and voltages to give OS warnings if they go out of any comfort zones

Other features include using a Bluetooth device as a media player or as an overclock tool for the system, and options to update and change the BIOS and its logo.

 

 

The auto overclock system we will cover later, but the voltage and frequency screen is of interest. Unlike most other Cougar Point motherboard manufacturers, ASUS lets a user control the BCLK and the multiplier for the CPU from the OS in real time—not requiring reboots in-between. There are a couple of negative points however—the iGPU frequency requires a reboot after every selection, and the changes you do make to the CPU frequency aren't written to the BIOS (and thus aren't permanent) nor are they initialized on reboot, requiring a manual adjust on every boot.

 

Of particular interest is the fan profiling, which is pretty substantial compared to other motherboard manufacturers—even ECS which we have recently liked. There are a raft of preset options, or each fan group can be controlled independently. Unfortunately you can only control the CPU fans as a group and the chassis fans as a group, rather than all of them individually.

Virtu

Anand will be covering Virtu is some detail in his Z68 article, however I'd like to explain my experiences with the software for the ASUS Z68 board.

If you've never heard of Virtu, it's a program developed by LUCIDLOGIX which essentially enables the use of both the integrated GPU in the processor and the discrete GPU connected to a PCIe slot on board.

Virtu can run in three modes—off (normal mode with a discrete GPU, integrated GPU is turned off), i-Mode (i for integrated) and d-Mode (d for discrete). These latter two modes consist of:

For i-Mode, the integrated GPU (iGPU) is used as the main video output, allowing the discrete graphics (dGPU) to run at idle. The iGPU is used for doing the majority of non-3D activity (transcoding, etc.) and as such the overall power of the system should be lower. Under full 3D mode, Virtu uses the dGPU to process the raw data, and then takes a copy of the memory buffer and puts this into the iGPU, which the iGPU can then process. There is a small overhead associated with this transfer, limiting the capabilities of the dGPU. In this mode, we are limited to one dGPU on board.

For d-Mode, the dGPU is used as the main video output, meaning this time the video cable is connected to the dGPU. In this mode, multi-dGPU setups such as SLI and Crossfire can be activated. For all work, the dGPU provides the video output. The only difference in d-Mode to any regular computer is that we now have access to the superior transcoding capabilities of the iGPU—any program which can use the iGPU for a process boost is monitored by Virtu so the iGPU can be invoked to do its job. There are power savings in this mode, limited to the power difference between the iGPU doing the computation rather than the dGPU on any other system.

To sum up: both modes allow Quick Sync, i-Mode is limited to one dGPU, offers power savings, but at the expense of 3D performance; d-Mode is multi-GPU, no power savings, unless you use Quick Sync over a GPU.

Does that make sense at all? Well in my line of computer use, I can see three main issues at stake here:

1) In i-Mode, how good are the power savings?
2) in i-Mode, how bad is the overhead in 3D mode?
3) in d-Mode, is the 3D mode hindered by Virtu?

Luckily, I was able to answer all my own questions.

In i-Mode, I took an AMD GPU (5850 1GB) and an NVIDIA GPU (GTX460 768MB) and performed my normal power tests on them—Idle, HD Video Playback, OCCT (CPU Stress Test), and High Resolution Metro 2033. The results are as follows:

AMD 5850 Power (Normal/i-Mode):
Idle: 81/85
Video: 85/92
OCCT: 148/150
Metro: 202/205

GTX 460 Power (Normal/i-Mode):
Idle: 74/75
Video: 106/80
OCCT: 148/144
Metro: 216/212

In my experience, the only power saving observed was with the GTX 460 when watching HD video. This is essentially in line with the Virtu advertising, but I'm under the impression it has to be taken with a pinch of salt. In these 'modern' times, AMD and NVIDIA are pretty good with their sleep states—meaning in light video loads, you don't need to power up the whole GPU. This is what keeps the AMD GPU from increasing its power under HD video mode. In fact, with the AMD GPU, I saw an increase in power from using Virtu, as the iGPU was enabled all the time—under normal mode, it's not activated and it is power gated so it uses almost no power.

In terms of 3D, I ran my series of gaming benchmarks and resolutions for comparison. We actually came across a flaw in Metro 2033 thanks to this—when the benchmark program is loaded, it checks the current video output for the DirectX capabilities. As we're being channeled through the iGPU when we load it, it sees DX10. The dGPU is only invoked when the benchmark launches into full 3D mode—so we're stuck benchmarking in DX10. The Dirt 2 benchmark is full DX11, as the settings are decided after the game launches (and the dGPU becomes active).

AMD 5850 FPS (Normal/i-Mode):
Metro 2033 DX10 1920x1080: 23.1/21.8 (-5.6%)
Metro 2033 DX10 1680x1050: 58.5/55.7 (-4.8%)
Dirt 2 DX11 1920x1080: 66.4/60.75 (-8.5%)
Dirt 2 DX11 1680x1050: 82.3/74.65 (-9.3%)

GTX 460 FPS (Normal/i-Mode):
Metro 2033 DX10 1920x1080: 18.4/16.8 (-8.7%)
Metro 2033 DX10 1680x1050: 46.5/43.4 (-6.7%)
Dirt 2 DX11 1920x1080: 45.0/ 40.6 (-9.8%)
Dirt 2 DX11 1680x1050: 77.9/ 73.2 (-6.0%)

On average, we see a decrease in performance of around 5-10% due to Virtu in this mode. In my view, this is quite a lot, but then again I do like to play a few games now and again. There are potential advantages in the power savings, and there will be a few situations where the iGPU just won't be able to handle certain calculations and a consumer will require a dGPU, but is it really worth a 10% decrease in single dGPU performance?

Now to my third question, if there's a difference in d-Mode compared to a normal non-Virtu environment. Thankfully, by running the gaming benchmarks, I saw no change in FPS values:

Dirt2, single GPU, 1920x1080: 66.4 FPS
d-Mode: 66.4 FPS

Dirt2, single GPU, 1680x1050: 82.3 FPS
d-Mode: 82.3 FPS

Now I must stress that even with statistical variance, it would be rare to get these values spot on, but these were the averages of several runs in each case.

In either mode, programs can be specified to switch where the power is coming from—the picture above is the default list of programs when I am in d-Mode on the ASUS P8Z68-V Pro.

ASUS P8Z68-V PRO: Overview and Visual Inspection ASUS P8Z68-V PRO: UEFI and Overclocking
POST A COMMENT

95 Comments

View All Comments

  • tomoyo - Wednesday, May 11, 2011 - link

    Haha I love russia lines.
    But I do think a number of us want a system that is the fastest, lowest power, and quietest. Conflicting options, but options I always go for in every system. Also cheapest is nice also. It seems like a much better challenge than the lame boring crap of fastest o/c. Only the truly awesome can mix everything together :)
    Reply
  • xinaes - Thursday, May 12, 2011 - link

    Conflicting, like anything else in life. We want to know what options are available and to find the best balance / compromise for our needs. Reply
  • L. - Thursday, May 12, 2011 - link

    Again, you want the greenest solution ?

    Undervolting is NOT it.
    Sandy Bridge != reasonably powerful.
    Reply
  • tomoyo - Wednesday, May 11, 2011 - link

    Uh what? Hello sandy bridge is amazingly low power consumption AND fast. Nobody wants a piece of @#$% atom or e series when you can get something fast AND low power consumption. Reply
  • L. - Thursday, May 12, 2011 - link

    Errr .. you might want to go back to school and learn how to compare numbers ...

    There is NO comparison between an e-350 and a Sandy Bridge in terms of power consumption - besides said chip is not really a piece of crap if you don't play modern games.
    Reply
  • NeBlackCat - Friday, May 13, 2011 - link

    Which do you think wins in power efficiency, for the widest range of tasks from nothing to re-encoding a BlueRay? Reply
  • Stuka87 - Wednesday, May 11, 2011 - link

    It would be cool to see a review done that way to see what kind of power savings there are. My guess they will be very little since just about every modern chips declocks itself constantly.

    But this motherboard is NOT for that segment. This is a top end performance board. NOT the board to use if you want yo conserve energy.
    Reply
  • vol7ron - Wednesday, May 11, 2011 - link

    The procs go into a low-power/normal state when not in use and they jump in clocks when workloads demand, but that low-power state is probably spec defined, and not the min that you could get. Just like, if you were to OC the chip yourself, you'd get more jump than the max boost.

    For these reasons, if a person wanted to manually set an undervol7ed/underclocked configuration, it'd be nice to know before a purchase. I don't think it's a fair assumption to say that same user would always use that configuration. They might do video/photo editing or gaming very sparingly and just want to conserve power when and where they can.
    Reply
  • cyklonman - Wednesday, May 11, 2011 - link

    Sandy bridge undervolt it self to rougly 4W in idle, undervolting at load will gain more but there is no real reason. Reply
  • NeBlackCat - Wednesday, May 11, 2011 - link

    But when you're not at idle... Reply

Log in

Don't have an account? Sign up now