Logic Supply ML100G-30 Fanless Broadwell vPro Industrial NUC Reviewby Ganesh T S on April 29, 2015 11:30 AM EST
- Posted in
- Industrial PC
- Passive Cooling
- Logic Supply
ML100G-30 BIOS and vPro Features
The motherboard used in our review sample of the ML100G-30 is the Maple Canyon Intel NUC board NUC5i5MYBE. The product code is also shared with a Core i3 version. However, only the Core i5 board supports various advanced technologies such as the Intel Management Engine (ME), VT-d (virtualization support for directed I/O), vPro (a suite of features that started out with Intel AMT - more on this later in this section), VT-x (hardware support for running virtual machines) and TPM (Trusted Platform Module) along with TXT (Trusted Execution Technology) for platform protection. The BIOS options available in the ML100G-30 i5 version reflect these additional aspects. Before looking at those, the gallery below presents some of the options that are similar in nature to the NUC5i5RYK that we reviewed earlier.
Important aspects to note in the default settings are that the memory runs at the rated speed of 1600 MHz (11-11-11-28) only - no memory overclocking here, and that the board is set for maximum performance (cTDP is not being used to bring down the power consumption / temperature / performance).
Broadwell vPro and AMT
Intel introduced the Broadwell vPro processors earlier this year. The primary vPro feature is Intel's Active Management Technology (AMT) - The full set of vPro features include out-of-bound management of certain Intel SSDs such as the SSD Pro 2500 series, Windows InstantGo support, wireless docking using Intel's WiGig 802.11ad chipset etc. Not all vendors who adopt the vPro platform need to provide all these features. In the ML100G-30, AMT can be enabled for remote access / KVM control of even the boot process and BIOS settings.
The first difference that users would notice with the boot process is the ability to press <CTRL-P> to enter the Intel MEBx (Management Engine BIOS eXtensions).
The MEBx configuration pages allow for setting of an admin password (default is 'admin', and it needs to be updated on first access) and the ability to control local updates to the ME firmware (from the OS). The AMT configuration page allows for control of the manageability features. Aspects include SOL (Serial over LAN), IDER (Integrated Drive Electronics Redirection - for remote mounting of disk images) and KVM (Keyboard, Video, Mouse) over the network. It also allows for the network interface to be configured for remote management. On the ML100G-30, we were able to configure only the wired interface for this purpose.
After setting up the various options in the MEBx, we used RealVNC's VNC Viewer Plus to get remote access (even for the boot process, as shown in the screenshot below).
Industrial PCs are mostly deployed in areas where the machine likely needs to be running 24/7/365 and any downtime is very costly. Immediate physical access to units installed in an industrial rack is also an issue at times. In such cases, the ability of IT personnel to perform remote troubleshooting / BIOS fixes using Intel AMT's remote KVM feature is very helpful. The vPro capabilities of the unit make this possible. As a reminder, this is only available in the i5 version of the Logic Supply ML100G-30 and not the i3 version.
Post Your CommentPlease log in or sign up to comment.
View All Comments
Beaver M. - Saturday, May 2, 2015 - linkYeah well, I have an i7 in that same M350. You were saying?
meacupla - Wednesday, April 29, 2015 - linkIndustrial PC, must continue to work in a pile of dust and metal shavings.
But this model is lacking VGA and serial, so IDK how industrial it is...
eBob - Wednesday, April 29, 2015 - linkI might be able to use this as an OIT or a small SCADA system, but you are correct. Right now, I am selling our existing customers a whitebox computer with our software loaded on it. I need a minimum of two serial ports and PS/2 ports (the keyboard and trackpad are integrated into the machine cabinet).
Morawka - Friday, May 8, 2015 - linkJust buy a couple USB to Serial adapters since you wont be needing the ports for mouse and keyboard. Even if you needed them, you could get small and compact un-powered usb hub
DarekLogic - Wednesday, April 29, 2015 - linkDarek here from Logic Supply. The ML100G-30 features an optional COM port punch-out on the front of the system and is available as a drop-down during configuration. Due to its size, VGA is not currently available on the NUC form factor from our motherboard manufacturers.
Sivar - Wednesday, April 29, 2015 - linkI've worked with Logic Supply to buy high-reliability systems and have found that most of their models are very flexible and can accommodate serial ports, VGA, DVI, etc. by using their system builder form.
I keep wanting to buy something like this for an HTPC, but with 4K HEVC support being unknown and the price being rather higher than fan-cooled models, it is hard to justify yet. :/
joex4444 - Wednesday, April 29, 2015 - linkDP -> VGA adapters exist and should be OK. In many industrial settings, these run headless anyways.
Michael Bay - Wednesday, April 29, 2015 - link>current AMD smoking anything ever
Pissedoffyouth - Wednesday, April 29, 2015 - linkUh its graphics are top notch
Ammaross - Wednesday, April 29, 2015 - linkWe'll have to keep that in mind when the SCADA system has to play World of Warcraft between jobs...