Getting a HTPC setup right for the 4K era has become a very confusing exercise for the consumers. We tried to clarify some aspects in our Future-proofing HTPCs for the 4K Era: HDMI, HDCP and HEVC piece back in April. While we did touch upon the features that consumers should look for in the HDMI sinks in the setup (i.e, the HDMI ports on the TV and the AV receiver), we didn't go into detail on the characteristics of the display itself.

Picture quality is of paramount importance, but it is usually not a known aspect unless one reads the after-launch reviews. However, there are some basic specifications that can help narrow down the search. Availability of 4Kp60, HDMI 2.0, HDCP 2.2 and ARC (audio return channel) support are readily available in the spec sheets of the displays coming into the market nowadays. In this piece, we will cover a few 'behind-the-scene' aspects and how the recently launched Hisense 50H7GB fares with our checklist.

4Kp60 RGB 4:4:4 Support

Videos meant for consumer consumption have always been encoded in 4:2:0 format with chroma sub-sampling. Frames encoded / sent to the display in this format are fine for viewing purposes, since the effects of the sub-sampling are not very evident in rapidly changing images. Unfortunately, HTPCs are multi-purpose devices. Even though video decode and display is probably the majority of its workload, it can be used for tasks such as web browsing also. Driving mostly-static desktop frames to the display in 4:2:0 makes for a bad user experience. For a detailed explanation, I strongly suggest that readers peruse this AVSForum thread. Usually, most displays supporting 4Kp60 RGB 4:4:4 also support the other variants - 4Kp60 4:2:0 at 8b, 10b and 12b, as well as 4Kp60 4:2:2 at 8b and 10b.

Ensure that any display you plan to purchase for a 4K HTPC supports 4Kp60 RGB 4:4:4 input in the HDMI 2.0 / HDCP 2.2 sink.

HDR Capability

Ultra HD Blu-rays are expected to come with high-dynamic range content. HDMI 2.0a was recently ratified with support for HDR metadata flags. Most displays can get firmware upgrades if they are already HDMI 2.0 certified. However, that might not always be the case, and the consumer needs to pay particular attention to this aspect.

If you are planning to watch 4K Blu-rays on your display, ensure that it supports HDR, both from the HDMI sink perspective, as well as the display perspective.

Panel Bit-Depth

Display panels usually come in 8b, 10b or 12b varieties. This bit-depth refers to the number of bits used to encode each sub-pixel (color channel) that gets displayed. Very cheap panels even adopt 6b panels. Note that the input coming via, say, HDMI has a minimum bit-depth of 8b per sample. Lower bit-depth panels adopt dithering to represent higher bit-depth content. When done in a temporal manner (i.e, over time for successive frames), it is called FRC (frame rate control). Suffice to say that FRC is not something you would want in your display, since it doesn't accurately reflect what is being transferred over the display link.

Higher panel bit-depth is also useful for representing a wider color gamut without banding artifacts. With the adoption of the larger BT.2020 color space for UHD, it is good to have a panel with higher bit-depth compared to what one had for Full HD (the smaller BT.709 color space).

In addition, 4K videos in HEVC for consumer delivery are already being encoded with the Main10 profile (4:2:0, 10b per sample). In order to accurately display such videos, it is essential that the panel bit-depth matches or exceeds 10b. Another aspect of HDMI 2.0a is HDR (high dynamic range), which we briefly covered in the earlier sub-section. This needs 10b at the minimum for each sub-pixel.

All things considered, ensure that any display you plan to purchase for a 4K HTPC has a 10b (or higher) panel. (Update: One of the readers had mailed in asking me to clarify this: I mean a '10-bit panel', not 'panel with
transmitter than can receive 10-bit input signals' - in case that wasn't clear)

Color accuracy, high refresh rate and low input lag are other aspects that need to be paid attention if one plans to edit photos and/or play games on the display. In addition, it is also important to have the ability to turn off motion interpolation to avoid soap opera effects in movies and certain other videos. The higher the coverage of the BT.2020 color gamut, the better. However, these are aspects that need to checked in the display reviews.

Hisense 50H7GB 4K TV

This article was triggered in part by the launch of the Hisense 50H7GB 50" 4K TV last week. In addition to 4Kp60 support with HDMI 2.0 and HDCP 2.2, the TV also supports 1080p120 with real 120 Hz refresh rates and carries a "Netflix Recommended TV" designation. All of this comes for just $598 with Wal-Mart as the main distributor. Surprisingly, the TV also carries a 4-year in-home service warranty. Most of the technical details not available in the press release have been gathered by HDGuru. In addition, there is also a YouTube video review with the TV in action. The TV is powered by the MediaTek 5657 quad-core SoC.

Piqued by the price to specifications balance, we contacted Hisense and got some more information that is summarized in the table below. All the components (panel, TCON, BLU and enclosure) other than the open cell glass are manufactured by Hisense.

Hisense 50H7GB
4K Display for HTPCs - Checklist
Aspect Notes
HDMI 2.0 with HDCP 2.2 (4Kp60) On HDMI3 and HDMI4
HDMI 1.4 with HDCP 2.0 (4Kp30) On HDMI1 and HDMI2
ARC (Audio Return Channel) On HDMI2
Mobile High-definition Link (MHL) On HDMI1 (MHL v2.0)
4Kp60 HDMI 2.0 Supported Input Formats
  • 4:4:4 8b
  • 4:2:2 8b, 10b
  • 4:2:0 8b, 10b, 12b
HDMI 2.0a (HDR Metadata Support) Not Upgradable
Input Frame Rate Support Up to 120 fps @ 1080p
Display Refresh Rate Support Up to 480 Hz with High Ultra Smooth Motion
Panel Bit-Depth VA, 8-bit
Launch Price $600

Based on Hisense's response, it looks like the 50H7GB might not tick all the boxes for the perfect HTPC 4K display (given the lack of HDR capabilities). But, given the price, it is going to be hard to complain. On the other hand, support for 4Kp60 RGB 4:4:4 makes it an interesting display. At 50", it might be hard to justify calling it a monitor, but it seems to be a good candidate for connecting to computers in general (particularly for an 'entry-level' 4K HTPC setup).

POST A COMMENT

68 Comments

View All Comments

  • sheh - Friday, June 5, 2015 - link

    Any references to that? I find it hard to believe. Computer monitors, cellphones, other TVs, are all capable, for some years now, of 1080p or higher without color detail loss. We're not talking about video decoding, but about getting HDMI input through some/no processing, and from there to the panel. Reply
  • nevcairiel - Saturday, June 6, 2015 - link

    Most/Many TVs have a 4:4:4 PC mode which can pass-through the content untouched. Its just when they start to do image processing that its going to be degraded. Monitors and cell-phones don't have movie-like processing chips in them that would do this.

    Unfortunately, this image processing is quite nice to have in many circumstances, so its always a trade-off :(
    Reply
  • sheh - Saturday, June 6, 2015 - link

    I thought we were talking about PC/game modes. The thing is, many TVs don't have 4:4:4 even if you turn off all processing or even in PC/game mode. That's what I meant by lazy firmware/software. Reply
  • Shadowmaster625 - Friday, June 5, 2015 - link

    What about 1440p @ 120? Reply
  • Gunbuster - Friday, June 5, 2015 - link

    Come on Hisense, make a 39" or 40" model and you'll be the new Seiki!! Reply
  • icrf - Friday, June 5, 2015 - link

    I have the 39" Seiki, and I have to say I wouldn't do it over again. Sure, there are lots of fiddly user experience things that make life difficult, but the end result is 39" is just too big for the distance I sit at my desk.

    I used to have a 30" 2560x1600 Dell display, and really enjoyed that. I think I'd be happier with a 32" 4K display than the 39" TV I have now. Maybe even a pair of 32" displays over the single 39". Just too much.

    Do 4K desktop displays still require MST?
    Reply
  • Gunbuster - Friday, June 5, 2015 - link

    I guess you need a bigger desk ;) I love my Seiki as a monitor. Reply
  • Coldsnap - Friday, June 5, 2015 - link

    That Hisense is interesting. Mostly in the 1080p @ 120fps. For my HTPC use, I'm still a bit far away from 4k gaming at 60fps out of a single video card. I wish it wasn't a 4k panel though. Does anyone make a straight panel thats 1080 120fps? Reply
  • mars2k - Friday, June 5, 2015 - link

    Thanks for the deepish dive. One question, why arc enabled on only HDMI 1.4 port? I could see this as a concession to entry level adopters with non HDMI 2.0a enabled receivers or HTPCs but what would engineering a 2 arc enabled port entail? Reply
  • romrunning - Friday, June 5, 2015 - link

    Probably just cheaper. After all, audio data doesn't need nearly as much bandwidth as video data. So there isn't a need for ARC to travel over a higher bandwidth port, like a HDMI 2.0 or 2.0a port. Reply

Log in

Don't have an account? Sign up now