Sizing Up Servers: Intel's Skylake-SP Xeon versus AMD's EPYC 7000 - The Server CPU Battle of the Decade?
by Johan De Gelas & Ian Cutress on July 11, 2017 12:15 PM EST- Posted in
- CPUs
- AMD
- Intel
- Xeon
- Enterprise
- Skylake
- Zen
- Naples
- Skylake-SP
- EPYC
Single Threaded Integer Performance: SPEC CPU2006
Even in the server market where high core count CPUs are ruling the roost, high single threaded performance is still very desirable. It makes sure that a certain level of performance is guaranteed in every situation, not just in "throughput situations" of "embarrassingly parallel" software.
SPEC CPU2017 has finally launched, but it did so while our testing was already under way. So SPEC CPU2006 was still our best option to evaluate single threaded performance. Even though SPEC CPU2006 is more HPC and workstation oriented, it contains a good variety of integer workloads.
It is our conviction that we should try to mimic how performance critical software is compiled instead of trying to achieve the highest scores. To that end, we:
- use 64 bit gcc : by far the most used compiler on linux for integer workloads, good all round compiler that does not try to "break" benchmarks (libquantum...) or favor a certain architecture
- use gcc version 5.4: standard compiler with Ubuntu 16.04 LTS. (Note that this is upgraded from 4.8.4 used in earlier articles)
- use -Ofast -fno-strict-aliasing optimization: a good balance between performance and keeping things simple
- added "-std=gnu89" to the portability settings to resolve the issue that some tests will not compile with gcc 5.x
- run one copy of the test
The ultimate objective is to measure performance in non-"aggressively optimized" applications where for some reason – as is frequently the case – a "multi-thread unfriendly" task keeps us waiting.
First the single threaded results. It is important to note that thanks to modern turbo technology, all CPUs will run at higher clock speeds than their base clock speed.
- The Xeon E5-2690 ("Sandy Bridge") is capable of boosting up to 3.8 GHz
- The Xeon E5-2690 v3 ("Haswell") is capable of boosting up to 3.5GHz
- The Xeon E5-2699 v4 ("Broadwell") is capable of boosting up to 3.6 GHz
- The Xeon 8176 ("Skylake-SP") is capable of boosting up to 3.8 GHz
- The EPYC 7601 ("Naples") is capable of boosting up to 3.2 GHz
First we look at the absolute numbers.
Subtest | Application type | Xeon E5-2690 @ 3.8 |
Xeon E5-2690 v3 @ 3.5 |
Xeon E5-2699 v4 @ 3.6 |
EPYC 7601 @3.2 |
Xeon 8176 @3.8 |
400.perlbench | Spam filter | 35 | 41.6 | 43.4 | 31.1 | 50.1 |
401.bzip2 | Compression | 24.5 | 24.0 | 23.9 | 24.0 | 27.1 |
403.gcc | Compiling | 33.8 | 35.5 | 23.7 | 35.1 | 24.5 |
429.mcf | Vehicle scheduling | 43.5 | 42.1 | 44.6 | 40.1 | 43.3 |
445.gobmk | Game AI | 27.9 | 27.8 | 28.7 | 24.3 | 31.0 |
456.hmmer | Protein seq. analyses | 26.5 | 28.0 | 32.3 | 27.9 | 35.4 |
458.sjeng | Chess | 28.9 | 31.0 | 33.0 | 23.8 | 33.6 |
462.libquantum | Quantum sim | 55.5 | 65.0 | 97.3 | 69.2 | 102 |
464.h264ref | Video encoding | 50.7 | 53.7 | 58.0 | 50.3 | 67.0 |
471.omnetpp | Network sim | 23.3 | 31.3 | 44.5 | 23.0 | 40.8 |
473.astar | Pathfinding | 25.3 | 25.1 | 26.1 | 19.5 | 27.4 |
483.xalancbmk | XML processing | 41.8 | 46.1 | 64.9 | 35.4 | 67.3 |
As raw SPEC scores can be a bit much to deal with in a dense table, we've also broken out our scores on a percentage basis. Sandy Bridge EP (Xeon E5 v1) is about 5 years old, the servers based upon this CPU are going to get replaced by newer ones. So we've made "Single threaded Sandy Bridge-EP performance" our reference (100%) , and compare the single threaded performance of all other architectures accordingly.
Subtest | Application type | Xeon E5-2690 @ 3.8 |
Xeon E5-2690 v3 @ 3.5 |
Xeon E5-2699 v4 @ 3.6 | EPYC 7601 @3.2 | Xeon 8176 @ 3.8 |
400.perlbench | Spam filter | 100% | 119% | 124% | 89% | 143% |
401.bzip2 | Compression | 100% | 98% | 98% | 98% | 111% |
403.gcc | Compiling | 100% | 105% | 70% | 104% | 72% |
429.mcf | Vehicle scheduling | 100% | 97% | 103% | 92% | 100% |
445.gobmk | Game AI | 100% | 100% | 103% | 87% | 111% |
456.hmmer | Protein seq. analyses | 100% | 106% | 122% | 105% | 134% |
458.sjeng | Chess | 100% | 107% | 114% | 82% | 116% |
462.libquantum | Quantum sim | 100% | 117% | 175% | 125% | 184% |
464.h264ref | Video encoding | 100% | 106% | 114% | 99% | 132% |
471.omnetpp | Network sim | 100% | 134% | 191% | 99% | 175% |
473.astar | Pathfinding | 100% | 99% | 103% | 77% | 108% |
483.xalancbmk | XML processing | 100% | 110% | 155% | 85% | 161% |
SPEC CPU2006 analysis is complicated, and with only a few days spend on the EPYC server, we must admit that what follows is mostly educated guessing.
First off, let's gauge the IPC efficiency of the different architectures. Considering that the EPYC core runs at 12-16% lower clockspeeds (3.2 vs 3.6/3.8 GHz), getting 90+% of the performance of the Intel architectures can be considered a "strong" (IPC) showing for the AMD "Zen" architecture.
As for Intel's latest CPU, pay attention to the effect of the much larger L2-cache of the Skylake-SP core (Xeon 8176) compared to the previous generation "Broadwell". Especially perlbench, gobmk, hmmer and h264ref (the instruction part) benefit.
Meanwhile with the new GCC 5.4 compiler, Intel's performance on the "403.gcc benchmark" seems to have regressed their newer rchitectures. While we previously saw the Xeon E5-2699v4 perform at 83-95% of the "Sandy Bridge" Xeon E5-2690, this has further regressed to 70%. The AMD Zen core, on the other hand, does exceptionally well when running GCC. The mix of a high percentage of (easy to predict) branches in the instruction mix, a relatively small footprint, and a heavy reliance on low latency (mostly L1/L2/8 MB L3) seems to work well. The workloads where the impact of branch prediction is higher (somewhat higher percentage of branch misses) - gobmk, sjeng, hmmer - perform quite well on "Zen" too, which has a much lower branch misprediction penalty than AMD's previous generation architecture thanks to the µop cache.
Otherwise the pointer chasing benchmarks – XML procesing and Path finding – which need a large L3-cache, are the worst performing on EPYC.
Also notice the fact that the low IPC omnetpp ("network sim") runs slower on Skylake-SP than on Broadwell, but still much faster than AMD's EPYC. Omnetpp is an application that benefited from the massive 55 MB L3-cache of Broadwell, and that is why performance has declined on Skylake. Of course, this also means that the fractured 8x8 MB L3 of AMD's EPYC processor causes it to perform much slower than the latest Intel server CPUs. In the video encoding benchmark "h264ref" this plays a role too, but that benchmark relies much more on DRAM bandwidth. The fact that the EPYC core has higher DRAM bandwidth available makes sure that the AMD chip does not fall too far behind the latest Intel cores.
All in all, we think we can conclude that the single threaded performance of the "Zen architecture" is excellent, but it somewhat let down by the lower turbo clock and the "smaller" 8x8 MB L3-cache.
219 Comments
View All Comments
TheOriginalTyan - Tuesday, July 11, 2017 - link
Another nicely written article. This is going to be a very interesting next couple of months.coder543 - Tuesday, July 11, 2017 - link
I'm curious about the database benchmarks. It sounds like the database is tiny enough to fit into L3? That seems like a... poor benchmark. Real world databases are gigabytes _at best_, and AMD's higher DRAM bandwidth would likely play to their favor in that scenario. It would be interesting to see different sizes of transactional databases tested, as well as some NoSQL databases.psychobriggsy - Tuesday, July 11, 2017 - link
I wrote stuff about the active part of a larger database, but someone's put a terrible spam blocker on the comments system.Regardless, if you're buying 64C systems to run a DB on, you likely will have a dataset larger than L3, likely using a lot of the actual RAM in the system.
roybotnik - Wednesday, July 12, 2017 - link
Yea... we use about 120GB of RAM on the production DB that runs our primary user-facing app. The benchmark here is useless.haplo602 - Thursday, July 13, 2017 - link
I do hope they elaborate on the DB benchmarks a bit more or do a separate article on it. Since this is a CPU article, I can see the point of using a small DB to fit into the cache, however that is useless as an actual DB test. It's more an int/IO test.I'd love to see a larger DB tested that can fit into the DRAM but is larger than available caches (32GB maybe ?).
ddriver - Tuesday, July 11, 2017 - link
We don't care about real world workloads here. We care about making intel look good. Well... at this point it is pretty much damage control. So let's lie to people that intel is at least better in one thing.Let me guess, the databse size was carefully chosen to NOT fit in a ryzen module's cache, but small enough to fit in intel's monolithic die cache?
Brought to you by the self proclaimed "Most Trusted in Tech Since 1997" LOL
Ian Cutress - Tuesday, July 11, 2017 - link
I'm getting tweets saying this is a severely pro AMD piece. You are saying it's anti-AMD. ¯\_(ツ)_/¯ddriver - Tuesday, July 11, 2017 - link
Well, it is hard to please intel fanboys regardless of how much bias you give intel, considering the numbers.I did not see you deny my guess on the database size, so presumably it is correct then?
ddriver - Tuesday, July 11, 2017 - link
In the multicore 464.h264ref test we have 2670 vs 2680 for the xeon and epyc respectively. Considering that the epyc score is mathematically higher, howdoes it yield a negative zero?Granted, the difference is a mere 0.3% advantage for epyc, but it is still a positive number.
Headley - Friday, July 14, 2017 - link
I thought the exact same thing