GlobalFoundries on Monday announced an important strategy shift. The contract maker of semiconductors decided to cease development of bleeding edge manufacturing technologies and stop all work on its 7LP (7 nm) fabrication processes, which will not be used for any client. Instead, the company will focus on specialized process technologies for clients in emerging high-growth markets. These technologies will initially be based on the company’s 14LPP/12LP platform and will include RF, embedded memory, and low power features. Because of the strategy shift, GF will cut 5% of its staff as well as renegotiate its WSA and IP-related deals with AMD and IBM. In a bid to understand more what is going on, we sat down with Gary Patton, CTO of GlobalFoundries.

7LP Canned Due to Strategy Shift

GlobalFoundries was on track to tape out its clients’ first chips made using its 7 nm process technology in the fourth quarter of this year, but “a few weeks ago” the company decided to take a drastic, strategic turn, says Gary Patton. The CTO stressed that the decision was made not based on technical issues that the company faced, but on a careful consideration of business opportunities the company had with its 7LP platform as well as financial concerns.

It is noteworthy that when GlobalFoundries first announced its 7LP platform in September 2016, it said that it would start risk production of processors using this technology in early 2018 (PR), which means that the first chips should have been taped out before that. When the company detailed the process in June 2018, it said that it expected to start “volume production ramping in the second half of 2018” (PR), which would be close to impossible if customers taped out their first chips only in Q4.

Generally, it looks like the company had to adjust its roadmap somewhere along the way, moving the start of high-volume manufacturing (HVM) further into 2019. Whether or not these adjustments had any implications on GlobalFoundries is up to debate. Keep in mind that AMD’s first 7 nm product was designed for TSMC’s CLN7FF from the beginning, so the company did not bet on GF’s 7LP in late 2018 anyway, and no rush with the manufacturing technology was needed for GF’s key customer.

Along with the cancellation of the 7LP, GlobalFoundries essentially canned all pathfinding and research operations for 5 nm and 3 nm nodes. The company will continue to work with the IBM Research Alliance (in Albany, NY) until the end of this year, but GlobalFoundries is not sure it makes sense to invest in R&D for ‘bleeding edge’ nodes given that it does not plan to use them any time soon. The manufacturer will continue to cooperate with IMEC, which works on a broader set of technologies that will be useful for GF’s upcoming specialized fabrication processes, but obviously it will refocus its priorities there as well (more on GF’s future process technologies later in this article).

So, the key takeaway here is that while the 7LP platform was a bit behind TSMC’s CLN7FF when it comes to HVM – and GlobalFoundries has never been first to market with leading edge bulk manufacturing technologies anyway – there were no issues with the fabrication process itself. Rather there were deeper economic reasons behind the decision.

Economic Reasons Behind the Move

As we noted in our article covering GlobalFoundries's new CEO hire earlier this year, former CEO Sanjay Jha was never able to make the company profitable. His key tasks were to increase GlobalFoundries’s sales, streamline the company in general, and ensure that it executes its roadmap.

To address the needs of the manufacturer’s traditional key client (AMD) and ensure that his company was competitive against other contract makers of semiconductors, he licensed Samsung Foundry's 14LPP fabrication technology. That strategy worked well. With Sunjay Jha at the helm, GlobalFoundries has managed to land a variety of new customers and increase its sales of semiconductor wafers from approximately $4.121 billion in 2013 to $6.176 billion in 2017. Besides, the foundry’s leading-edge Fab 8, which has been processing wafers using exclusively 14LPP process technology for well over 1.5 years now, is running at full capacity.

To ensure that GlobalFoundries remains competitive against Samsung Foundry and TSMC in the long run, Sunjay Jha obtained IP and development teams from IBM (along with two fabs and a lot of obligations), and poured in billions of dollars in development of the 7LP fabrication technology platform. The latter would include three generations of manufacturing processes and, possibly, a custom high-performance technology available exclusively to IBM. While everything appeared to proceed smoothly with the 1st Gen 7 nm process (DUV only), the 2nd Gen 7 nm process (with EUV used for non-critical layers, such as padding) still needed some additional development investments, and the 3rd Gen 7 nm (with intensive usage of EUV) required even more money for development and further could require installation of additional EUV equipment. Meanwhile, there were two things to consider.

First. If GlobalFoundries kicks off production using the 1st Gen 7 nm fabrication process, it would have needed to cure all of its teething troubles and offer its clients a roadmap forward. The latter would have included 2nd Gen and 3rd Gen 7 nm, but nothing stops there. Customers would have asked for 5 nm and then for 3 nm nodes. Meanwhile, you cannot tell your clients that you are packing up after a certain node and then hope that this node will be a success (the same is true for DUV-only 1st Gen 7 nm).

Second. Development of leading-edge process technologies is extremely expensive. Every new node requires billions of dollars in investments. Those costs are eventually amortized over each chip the company makes, so to keep increasing R&D costs from driving up chip prices, foundries need to produce more chips. To make more chips, they need to either run multiple fabs that use the same process technology (these are going to cost $10+ billion in the EUV era), or build giant fabs that process a gargantuan number of wafers (these are going to cost $20+ billion in the EUV era). Meanwhile, GlobalFoundries has only one leading-edge fab featuring capacity of 60,000 wafer starts per month. As a result, either GlobalFoundries has to pass these R&D costs on to the finite number of wafers it processes – and become uncompetitive against rivals in the process – or eat the costs with reduced profitability.

Meanwhile, having spent well over $20 billion on GlobalFoundries over the last 10 years, Mubadala, the owner of the company, is not inclined to lose more money or invest tens of billions in the hopes of becoming profitable one day. The investor wants GlobalFoundries to stop bleeding and start generating profits.

“The culture of [our investments], the ones I’ve been involved with, was about accumulating assets and then just maintaining it,” said Mubadala CEO Khaldoon Al Mubarak in an interview with Bloomberg earlier this year. “The shift that has happened over the last couple of years, that I’ve tried to push at Mubadala today, is a monetization strategy that makes sense, not with a view to cash out but with a view to reinvest.”

Gary Patton admits that GlobalFoundries never planned to be a leading producer of 7-nm chips in terms of volume. Furthermore, the company has been seeing increasing adoption of its 14LPP/12LP technologies by designers of various emerging devices, keeping Fab 8 busy and leaving fewer step-and-scan systems for 7LP products.

Without another big fab, it would be impossible to make any new leading-edge process technology competitive against Samsung and TSMC due to aforementioned scale reasons. Meanwhile, building a new fab (or even expanding the Fab 8 with another clean room module, which is something that GF considered several years ago) and creating another node or two would require another $10 – $15 billion from Mubadala, which is not inclined to invest just now. As a result, the GlobalFoundries has decided to switch entirely to specialized process technologies for emerging high-growth markets. This strategic shift enables it to reduce spending on R&D, slowdown procurement of new equipment, reduce its workforce by 5% (most of which will be in Malta), and potentially avoid direct competition against the aforementioned contract makers of semiconductors.

What’s Next for GlobalFoundries?
Comments Locked

127 Comments

View All Comments

  • NuclearArmament - Monday, August 27, 2018 - link

    This is stupid, stop trying to milk silicon beyond 11 nm and start using gallium arsenide or indium gallium arsenide. The Fujitsu AP2000 used BiCMOS and GaAs fabrication back in the early 1990s, for crying out loud. Get rid of silicon, it's outdated and needs to be replaced! You have BILLIONS of dollars and get government subsidies, why not take a risk?!
  • rahvin - Monday, August 27, 2018 - link

    The only problem of course is that Gallium based Semi's are about 100X to the cost which is why no one uses them for anything outside certain categories where the cost is justifiable.
  • Khenglish - Monday, August 27, 2018 - link

    iii-v materials can also only result in n-channel HFETs or NPN BJTs. You can't make an active pull-up device, which is required for any VLSI use. Only very high power resistive pull-up or current steering logic is possible.
  • evanh - Monday, August 27, 2018 - link

    Price by itself doesn't explain the why. Price is only an outcome due to lack of volume production. This is true for any mass produced product.

    Khenglish gives a real reason.
  • rahvin - Monday, August 27, 2018 - link

    Price is more than volume production, the materials are far more difficult to obtain, purify combine and handle than silicon and frequently involve highly toxic chemicals. Silicon on the other hand requires an enormous amount of energy but doesn't involve toxic chemical processing. Take a look at the wiki article and the processes to produce GaAs cyrstals, it's not simple. https://en.wikipedia.org/wiki/Gallium_arsenide
  • evanh - Tuesday, August 28, 2018 - link

    None of which makes it expensive.
  • SirPerro - Tuesday, August 28, 2018 - link

    Let me resume Silicon properties from wikipedia...

    - Abundant and cheap

    - Has economies of scales on its side

    - Very stable and can grow to high diameters with good yields

    - Very good thermal conductor for densely packed transistors

    - Its native oxide works very well as insulator with excellent electrical properties

    - Has much higher hole mobility which enables CMOS transistors with much lower power consumption

    - Is a pure element, avoiding the problems of stoichiometric imbalance and thermal unmixing of GaAs

    - It has a nearly perfect lattice, impurity density is very low and allows very small structures to be built

    And Gallium Arsenide drawbacks include...

    - Naturally, GaAs surface cannot withstand the high temperature needed for diffusion

    - GaAs does not have a native oxide, does not easily support a stable adherent insulating layer, and does not possess the dielectric strength or surface passivating qualities of the Si-SiO2

    -Because they lack a fast CMOS structure, GaAs circuits must use logic styles which have much higher power consumption; this has made GaAs logic circuits unable to compete with silicon logic circuits

    - Problems of stoichiometric imbalance and thermal unmixing

    - GaAs has a very high impurity density which makes it difficult to build integrated circuits with small structures, so the 500 nm process is a common process for GaAs

    So you know, usually statements like "This multitrillion dollar industry is wrong, what they do is stupid, they should do X" coming from random dudes on the internet are bullshit.
  • FunBunny2 - Tuesday, August 28, 2018 - link

    "So you know, usually statements like "This multitrillion dollar industry is wrong, what they do is stupid, they should do X" coming from random dudes on the internet are bullshit. "

    yeah but Dear Leader has done that for a lifetime, and look where it got him. :)
  • evanh - Tuesday, August 28, 2018 - link

    My sole argument is economies of scale is what defines the cost.
  • Mikewind Dale - Monday, July 19, 2021 - link

    And your argument is wrong. Economy of scale is one factor that determines cost, but it is not the only factor.

    If economy of scale were the only determinant of cost, then we would expect every product to be produced by a single monopolist, with a single factory. Any time there were two competing factories, they could reduce their costs by building a single factory of twice the size. The result would be that every product on earth would be produced in a single factory, owned by a single company.

    But that's obviously not the case in the real world.

Log in

Don't have an account? Sign up now